Chrome Set

€12.00

At present the best chromium effect pigment on the market, if the process applies properly get yourself an 80-90% mirror effect. Special varnish to coat the chrome or metalchrome effect. It protects the chrome paint and avoids, to a greater extent, its loss of mirror. Exclusive formula.

At present the best chromium effect pigment on the market, if the process correctly apply get yourself an 80-90% mirror effect. Product ready for use on solvent basis. Apply to thin passes with more air than product and special varnish to coat the chrome or metalchrome effect. Special formulation that protects the chrome effect and at the same time is the least removes the chromed pigment (mirror effect).

Format: 30ml Chrome 90% + 30ml Varnish + 6ml Catalyst

Preparation and base

1. - Start by washing the model and let the model dry.

2. - Apply a primer FSC013 or FSC014 in thin and soft layers and let dry approximately 10 to 15 minutes, then sandblasted 2000 smooth the primer and allow to dry.

3. - This is the most important step apply the FSC001 Black base in thin layers and and let dry about 30 minutes.

4. - After application of the black base and after good dry, apply a layer of varnish Clear Gloss VFC002 (blend of 100/50/50) ex: 10ml of varnish / 5ml diluent / 5ml activator, waiting 5-10 min. 

      between layers. Allow to dry at room temperature 24-72 hours. (attention in winter periods possibly longer)

      Make sure that the varnish is completely hardened.

Note: Be aware of dusts or surface irregularities. if there is sand and sand, polish if necessary (do not use wax).

Important: The black base should reflect as much as possible, only if chrome (if you can see the time model is perfect)

Chrome app

Shake the vial well and place on the airbrush, adjusting it to a pressure of 2 bars and apply the chrome at a distance of approximately 20 cm.

Apply several thin layers, ensuring that it applies with more air than chrome, so as not to over accumulate and achieve a mirror.

Allow to dry in a dry, moisture-free place for 24 hours.

Note: You may notice that the chrome is spleen and with metallic chrome dust, do not panic, it will solve in the next step.

1. - After the chrome has been dried, remove the metallic dust with a very soft and wide brush (type of ladies' manicure), in a very smooth way so as not to create scratches on the chrome.

Application of special varnish for chrome

Mix the final varnish to chrome Clear Gloss Chrome in a ratio of 100 - 20 (Ex: 10ml of Varnish and 2ml of activator). Apply 2 hands (with approx. 5 min between layers) and allow to dry in a dry place for 24 hours.

After the dry varnish, you can apply masks, other colors, oils or decals (tested with the most 

aggressive decal application products).

It is not recommended to use our products in cold or humid environments, use at a recommended temperature approximately 22Cº and always check the conditions of the space where you will paint.

To dilute if necessary use the Thinners Fire Scale Modeler. DO NOT use White Spirt, Acrylic Thinners or Cellulose Diluent, are not suitable for these products.

Cleaning of tools can be done with acetone, never use cellulose thinner or alcohol.

Work in a well ventilated area and always with a mask and keep away from children. Tighten the cap for safety after each use.

DO NOT USE NEAR HEAT,  FLAMES DURING THE PAINT PROCESS

Health and Safety Notes:

Harmful by inhalation, in contact with skin and if swallowed. Keep away from sources of ignition. NO SMOKING.

Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well-ventilated area. Keep out of the reach of children.

In case of intoxication contact.

For use and exclusive sale to modelers of age (18 years)

SFC007
2 Items
Available
Plain Colors

BLACK

FSC001
€4.50
Fire Scale Color paint is designed to have an extra-fine pigment, matte finish and fast drying which ensures a perfect paint even for the less experienced.
 2
Available
Primer

Grey Primer

FSC013
€4.50
Fire Scale Color paint is designed to have an extra-fine pigment, matte finish and fast drying which ensures a perfect paint even for the less experienced.
Available
Varnishes

Clear Gloss 2K

VFC002
€8.00
Fire Scale Colors gloss varnish, extraordinary covering with only 2 hands. High brightness and high hardness with its innovative reflow technology.
No reviews

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.

By continuing to browse you are agreeing to our use of cookies on this site. To not authorize its use, please use your browser options and change the cookie settings according to these instructions. For more information, see our Personal Data Protection Policy.